2 Ways to Make HughesNet Run Faster?

If you make the right changes in your HughesNet and the device on which you access the internet from the company, you can easily boost the speed of your internet. To know about these right changes, you can go through the information provided below.

Guide to Boost the Speed of HughesNet Internet

slow internet speed

Although HughesNet internet is known for offering high-speed internet services without any interruptions, however, some users experience speed issues with their internet due to different reasons and thus look for workarounds to overcome the problem. As the reasons responsible for slow HughesNet internet speed may vary from device to device it is being used for, it becomes difficult to fix the issue. Below are some of the workarounds that you can follow to boost the speed of your internet and be able to access websites, play games, and stream videos as usual.

Check the Satellite Dish

Considering that you cannot change the ISP, you can still try troubleshooting the problem by using the following steps and speed up your HughesNet internet connection. So, let us start by checking the Satellite receiver, or dish.

  1. Check the Dish and Cables for Damage

damange cable

To begin with, you will first need to take a closer look at your HughesNet satellite dish and cables. Be careful if your dish is on the roof. Now, you will check if there are any chips, cracks, or damage to your dish or cable. You will also need to make sure that the cables are connected properly to your dish and are not loose. Moreover, it is recommended to also make sure that no birds, squirrels, or other animals have nibbled the cable.

  1. Clear Off the Obstructions

While checking the dish and cables, it is suggested to remove any dirt, debris, or snow that could be on your satellite dish. This also includes clearing leaf piles, broken branches, and other unwanted stuff that your dish might have caught.

  1. Check the Position of your HughesNet Dish

In most of the US time, it is recommended to make sure that your Satellite receiver is pointing towards the south. If you think that the location of your dish is not proper, it is suggested to contact your HughesNet satellite internet and ask them to adjust the position.

ALSO READ -  Why Does My Internet Keep Disconnecting? Check Out Top 5 Tips

Do not try to reposition it yourself as your Internet Service Provider knows exactly as to how to set up the orientation of your dish to make it match the coordinates which will provide you the best possible signal.

NOTE: The coordinates are specific according to the location and direction of your house.

Check the Modem and Router

After you are done checking out your satellite dish and cables, and if there doesn’t seem to be any kind of issue, you may want to check your Modem and Router and see if you can optimize your internet equipment to get better internet speeds from your HughesNet connection.

  1. Try Using your Own Router

try new router

If you think that the router provided by HughesNet is probably not the best, maybe it is several years old by now. Using an outdated router can be one of the reasons that could be leading to slow internet speed.

In such a case, you may consider using your own router to make sure that not only it is up to date but also that it comes with the features that you want such as Dual-Ban technology, Dual-Band Technology, and perhaps even beamforming if you fancy it. There are numerous routers available from popular brands like TP-Link and Netgear which you can use to meet your requirements.

However if HughesNet doesn’t allow you to use a router of your own, you may contact them and ask to get your router replaced.

  1. Consider Restarting your Modem and Router

You must have heard about this workaround a lot of times. All you need to do in this workaround is to “power cycle” your modem whenever you face speed issues or any other kind of problem with your router. Power cycling or restarting your modem and router can sometimes help you reset a troublesome connection. To know how to restart your modem and router:

  • Start by unplugging your modem and router.
  • Keep it unplugged for at least 30 seconds before plugging it back.
  • After plugging back your modem, you will then need to boot them up. You may need to wait for a couple of minutes to complete the booting process.
  • Now, you will need to plug your router back in and allow it to boot. Wait for a couple of minutes.
  • After that, you will need to give your internet connection a speed test.
ALSO READ -  How to Fix Xfinity Error Code XRE-03007?


  1. Make Sure to Update Firmware of your Modem

firmware update router

Another reason that can lead to a slow internet connection is using an outdated firmware modem. Using an updated firmware running modem ensures that your router has proper support for functioning at its utmost capacity. An update modem is compatible with the latest technology which allows it to improve it to perform efficiently.

You can find the latest firmware for your router by visiting the official website of the manufacturer of your modem. If your modem is already running with the latest firmware, and still you are experiencing issues with it, you can go to the next step.

    1. Try Using an Ethernet Cable

Ethernet Cable

Although WiFi is convenient in accessing the internet on different devices, but it is generally not as fast as an Ethernet cable. This is because a WiFi doesn’t travel through the wire-like Ethernet which makes your internet connection lose speed and signal strength as it travels over distance and even needs to pass through walls, floor, and numerous other objects. On the other hand, a wired connection just has to travel through the Ethernet cable to reach your device.

However, if you only have the option to use WiFi, it is suggested to try switching to a different frequency, provided you have a dual-band router. If at present you are using a 2.4 GHz frequency network, it is suggested to try switching to the 5 GHz frequency network. Moreover, your internet might go to a higher level when the frequency you switch to is being used by a couple of devices that are looking for a high-speed connection.

  1. Optimize the Placement of your Router

placement of router

It is recommended to try keeping your router close to your device as it ensures that the internet connection has less distance to get to your device, resulting in minimum loss of speed. This workaround is not possible in all the situations and may or may not work with all HughesNet internet users.

  1. Use a WiFi Extender

WiFi Extender

As keeping the WiFi router close to your devices may not be possible in all the conditions, you may want to consider using a WiFi extender. A WiFi extender works by extending the signal strength and area which allows easy access to the internet in all parts of your home or office where you have installed HughesNet internet.

ALSO READ -  About Mesh Topology Advantages & Disadvantages

So, these are the workarounds that you can follow to make your HughesNet run faster.

Leave a Comment