Connect 2 Wifi Routers Wirelessly To Extend Range?

Connect Two Wifi Routers Wirelessly To Extend Rang

In this age where digital technology at its peak, you can easily connect two WiFi routers wirelessly without having any cable connection. Though most home computer networks use only one Wifi router, adding a second Wifi router makes sense in a few situations. You can use the second Wifi router to upgrade a wired network to support wireless devices. Here in this, blog, we will be describing the ways to connect two Wifi routers without cable.

Connect Two Wifi Routers Wirelessly To Extend Range
Sometimes it is difficult to lay the physical cable from one room to another room because of its messy looks. You are not satisfied with the situation until it’s not underground. If you are looking for an opportunity to connect Two Wifi Routers with each other to increase the wi-fi signal or range, then you can do it so. All you need to do is simply connect two WiFi routers wirelessly by using an Ethernet network or Bridge mode. This method is really useful for the long-distance connection where physical cables are not possible to connect, due to length and feasibility problems.

Benefits of connection two Wifi Routers wirelessly (Ethernet) –

  • This method not only saves the cable, but it also saves the time to lay physical cable and give you maintenance-free connectivity.
  • Well suited for the situation, where there is some construction work going on at the home or office station.
ALSO READ -  Things to Know About Luma WiFi

Utilize the prominent platform of the Ethernet network to connect two Wi-Fi routers wirelessly and replace the physical cable with a wireless bridge connection.

Steps to Connect Two Wi-Fi Routers Without Cable To Extend Range

By connecting your two Wi-Fi routers wirelessly, you can extend both the range and the maximum number of connections that your Internet can handle. To do the same, the easiest and the most promising way to connect two routers is by using Ethernet, though you may be able to use a wireless router to connect to the primary router with your secondary router.

Method 1: Utilize the Prompt Use of Ethernet Network

ethernet Network
  • To start with the process, make sure to determine the main Wi-Fi router. This will be the Wi-Fi router that is connected either to a dedicated modem or with the wall outlet.

Note: In case you have two of the same routers, you can anyone of them as the main router.

  • Now, it’s time to pick the secondary Wi-Fi router. This will be the router that is extending with your original network. The secondary Wi-Fi router will control the secondary network if you are creating a LAN-to-WAN network.
  • In the next step, place both of the routers near to your pcor laptop. This step is necessary so you can access both the routers very easily.
  • After this, you can use an Ethernet cable to connect both the routers (LAN-to-LAN or LAN-to-WAN Connection).

Note: You can use the LAN-to-LAN connection to extend your Wi-Fi range to include the second router. On the other hand, a LAN-to-WAN connection creates a second network inside of the main network, allowing you to place restrictions on any computers, smartphone devices, or other items that are connected to it.

  • Start performing the initial setup process of your Wifi router. Connect your main router to your modem by using an Ethernet cable, then connect your main to your modem with the cable, then connect your pc device to the router via a different Ethernet cable.
ALSO READ -  How to Set Up Cox Panoramic WiFi?

Note: If you are a Mac user, you can buy an Ethernet to USB-C adaptor majorly known as “Thunderbolt 3” to fix this problem. For Windows, if you don’t have Ethernet ports, you can buy an Ethernet to USB adapter.

  • Configure your primary Wi-Fi router with the correct settings by using the router’s manual or online documentation.
  • After this, change the DHCP settings, to do the same follow these settings:
  • Go to the router’s page and set the primary router’s addresses between 1.2 and
  • In case, creating a LAN-to-LAN network, you can leave the DHCP settingsat their default.
  • Now, configure the second router by disconnecting the first router and then connect the second one and do these steps:
  • Open the router’s page and change the IP address so that it matches the first router, then increase the second-to-last digit by one (e.g. becomes
  • If you are making a LAN-to-WAN network, change the WAN IP address to
  • Now, tap the “Subnet mask”and disable UPnP on the second router if it’s an option.
  • After this, configure the DHCP server on the secondary router and change the wireless channel, so that the signals do not interfere with each other.
  • Place both of your routers and run Ethernet cable between the two routers.
  • Finally, connect the routers, Plug one end of the Ethernet cable into any LAN port of the primary router, then plug the other end of the cable into the LAN port on the back of the second router to complete the process.
ALSO READ -  List of Best ATT U-Verse Routers

Method 2: Use Wireless Network

wireless network
  • To begin the steps, just make sure your equipment is compatible, as most of the wireless routers can be used as wireless access points.
  • Now, place both of your Wifi routers near your computer and perform the initial router set up process as (guided above).
  • In the next step, configure your router by entering the router’s IP address in a web browser. If you can’t find the router’s settings on your router’s page for the rest of this method, consult the router’s manual or online documentation.
  • Open the configuration page for the secondary router and connect the secondary router to your pc device with an Ethernet cable and open the configuration page. By doing this, find the “Internet” or “Wireless” setup page once you have logged in.
  • In the next step, enable the Bridge Mode. To do the setup, follow the process:
  • Select “Bridge Mode”or “Repeater Mode” from the “Network Mode”“Wireless Mode” or “Connection Type” menu on the Wireless page.
  • If you didn’t get these menu options, then your router likely does not support bridging.
  • Once the above-guided process is done, specify the secondary router’s IP addresswithin the primary router’s range.
  • Now, enter the unique name for your secondary router and place the secondary router where it gets at least 50% signal strength from the primary router.

By following these proven steps, you can surely connect two wifi routers with each other without having any cable.

1 thought on “Connect 2 Wifi Routers Wirelessly To Extend Range?”

  1. Is every step in method 1 “initial router setup” to be completed in the of both modems including ethernet cable connection before continuing to method 2?


Leave a Comment